Stitch Length; Differential Feed Ratio; Adjusting The Presser Foot; Presser Foot Pressure - KANSAI SPECIAL PX302-4W Instruction

7 7 7 7 - - - - 2 Stitch length

2 Stitch length 2 Stitch length 2 Stitch length
Loosen bolt A with a 9.5mm T-wrench.
Then turn screw B as required.
To decrease the stitch length, turn it clockwise.
To increase
counterclockwise (see the illustration on the right).

7 7 7 7 - - - - 3 Differential feed ratio

3 Differential feed ratio 3 Differential feed ratio 3 Differential feed ratio
Remove rubber plug C. Loosen nut D.
To increase the differential feed ratio, move up the
nut. To decrease the differential feed ratio, move
down the nut.
【8】ADJUSTING THE PRESSER FOOT

8 8 8 8 - - - - 1 Presser foot pressure

1 Presser foot pressure 1 Presser foot pressure 1 Presser foot pressure
The presser foot pressure should be as light as
possible, yet be sufficient to feed the fabric and
produce uniform stitches. To increase the presser
foot pressure, turn the adjusting knob clockwise
(see the illustration on the right).
the stitch length, turn it
10