Needles & Threading The Machine; Needles; Replacing The Needle; Threading The Machine - KANSAI SPECIAL WX Series Instruction Manual

【1】NEEDLES & THREADING THE MACHINE

1 1 1 1 - - - - 1 Needles

1 Needles
1 Needles 1 Needles
UY128GAS of Schmetz or Organ
Select the proper needle for the fabric and thread.
< Needles and needle size >
Schmetz UY128GAS Nm65 Nm70 Nm75 Nm80 Nm90
Organ UY128GAS
1 1 1 1 - - - - 2 Replacing the n

2 Replacing the needle

2 Replacing the n 2 Replacing the n
To replace the needle, check the needle carefully to see
that the scarf is turned to the rear of the machine (see the
illustration). Then install the needle correctly.
< Note >
Before replacing the needle, be sure to turn off the machine.
A clutch motor continues running for a while after the machine is turned off.
Therefore keep on pressing the pedal until the machine stops.

1 1 1 1 - - - - 3 Threading the machine

3 Threading the machine 3 Threading the machine 3 Threading the machine
Thread the machine correctly by referring to the illustration below.
Threading the machine incorrectly may cause skip stitching, thread breakage and/or
uneven stitch formation.
A, B, C ... Needle threads
D............. Top cover thread
E ............ Looper thread
# 09 # 10 # 11
eedle
eedle eedle
# 12 # 14
For stretchable threads
such as woolly thread
1