Welch Allyn CP 100 Update To Directions For Use page 36

46 Chapter 5 Performing ECG Tests
Figure 39. "Auto ECG Post-Print" Screen
Doe, Jane
Auto ECG Post-Print
I
V
aVR
Print
Copy
8. Press the desired softkey.
Softkey
Print Copy
Edit Test
Manual Save
Manual Send
Repeat Test
Exit
9:17AM Oct 16 05
HR 120
Edit Manual Repeat
Exit
Test Save Test
Effect
Prints a copy of the test.
Note Print Copy is not available for Stat Auto ECG, or if
there is no Patient Name or ID entered for Auto
To learn how to print multiple copies of all tests automatically, see
Interpretation and Copy Settings for Auto Reports"
Brings up the Edit Test – Patient Data screen. From here you can edit or confirm the
patient data and interpretation statements. See
After Printing" on page 61.
Saves the test to the electrocardiograph's test directory. See
In the Test Directory"
This Manual Save softkey appears only when Auto Save is disabled. For more on
Auto Save, see "Reviewing the Miscellaneous ECG Settings"
(May appear in place of Manual Save in
options:
• Memory Card
An SD memory card or removable USB storage device must be in place.
• Workstation
Either wireless communications must be configured or a USB cable must connect
the CardioPerfect workstation to the electrocardiograph's Com port B (
This Manual Send softkey appears only when Auto Save is enabled. For more on
Auto Save, see "Reviewing the Miscellaneous ECG Settings"
Lets you repeat a test for the current patient.
The ECG Preview screen appears if all leads are connected to the patient.
Welch Allyn CP 200 Electrocardiograph
Softkeys for choosing
post-printing options
on page 43.
"To Edit or Confirm a Test Directly
on page 70.
Figure 4 on page 14.) Displays two softkey
"Reviewing the
"Managing Saved Tests
on page 48.
).
on page 48.