Recording A Rhythm Ecg - Welch Allyn CP 100 Update To Directions For Use

Directions for Use

Recording a Rhythm ECG

A Rhythm ECG is a continuous, real-time printout of three leads at a time.
Rhythm ECGs are printouts only. They cannot be sent to an SD memory card or
removable USB storage device.
Figure 36. Rhythm ECG Testing, Process Diagram
To Record a Rhythm ECG
1. Press the Rhythm ECG key
Printing begins, and the following screen appears.
Figure 37. "Rhythm ECG" Screen
Doe, Jane
Rhythm ECG
2. (Optional) Adjust the waveforms.
See
3. Press
The Ready screen appears if all leads are connected to the patient.
Note
Printing begins.
9:17AM Oct 16 05
1. Change Leads I, II, III
2. Adjust Gain 10 mm/mV
3. Adjust Baseline Filter ON
4. Adjust Muscle Filter ON
5. Adjust Speed 25 mm/s
"Adjusting the ECG Waveforms"
or to stop printing.
Write the patient identification information on the printed report immediately
after the ECG test to avoid associating the ECG report with the wrong
patient.
Chapter 5 Performing ECG Tests
(Optional) Adjust
waveforms.
.
HR 120
on page 55.
49
or