Welch Allyn CP 100 Update To Directions For Use page 28

46 Chapter 5 Performing ECG Tests
Figure 34."Auto ECG Post-Print" Screen
Doe, Jane
Auto ECG : Post-Print
5. Select the desired item.
Item
Exit
Print Copy
Repeat Test
Export Test
9:17AM Oct 16 05
1. Exit
2. Print Copy
3. Repeat Test
4. Export Test
Effect
The Ready screen appears if all leads are connected to the patient.
A copy of the test prints.
Note Print Copy is not available for Stat Auto ECG, or if
there is no Patient Name or ID entered for Auto
To learn how to print multiple copies of all tests automatically, see
Interpretation and Copy Settings for Auto Reports"
The following screen appears.
Figure 35. "Auto ECG Repeat Test" Screen
Doe, Jane
Auto ECG Repeat Test
1. Adjust Gain
2. Adjust Baseline Filter
3. Adjust Muscle Filter
4. Print ECG
1. (Optional) Adjust the waveforms.
See "Adjusting the ECG Waveforms"
2. Choose Print ECG.
A new report prints.
Note If you do not enter the patient data, write the patient
identification information on the printed report
immediately after the ECG test to avoid associating the
ECG report with the wrong patient.
Sends the test to the memory card. An SD memory card or removable USB storage device
must be in place.
Welch Allyn CP 100 Electrocardiograph
on page 36.
9:17AM Oct 16 05
10 mm/mV
ON
ON
on page 55.
"Reviewing the