General Warnings; General Cautions - Welch Allyn CP 100 Update To Directions For Use

Update Through Software Version 2.5
Symbols
CP100, CP200
Operation Symbols
5134

General Warnings

CP100, CP200
Warnings related to Using the Electrocardiograph

General Cautions

CP100, CP200
CP100 and CP200 Directions for Use Chapter 5 updates
The following pages replace the applicable Chapter 5 pages in the previous versions of
the CP 100 and CP 200 Directions For Use.
CP 100 12-Lead Resting Electrocardiograph Directions for Use (mat. 708794)
CP 200 12-Lead Resting Electrocardiograph Directions for Use (mat. 708793)
If your CP 100 electrocardiograph has a serial number of 10020000, or greater, or your
CP 200 electrocardiograph has a serial number 20020000, or greater, this update
describes the changes in the operation of your electrocardiograph.
If your electrocardiograph has a serial number that is lower than 1002000 or 2002000, and
your device was recently serviced, it may contain some or all of these new features
depending on the scope of the services performed.
Electrostatic sensitive devices
To indicate packages containing electrostatic sensitive devices, or to identify
a device or connector that has not been tested for immunity to electrostatic
discharge.
NOTE: For further information, see IEC 60747-1.
WARNING To avoid the risk of associating ECG reports with the wrong patients,
each report must identify the patient. If any ECG report does not identify the
patient, write the patient identification information on the report immediately
following the ECG test.
Caution The Electrostatic sensitive devices symbol marked on the device
indicates devices or connectors that are sensitive to electrostatic discharge
which may result in an interruption of normal operation or damage to the device.
Prior to connecting or disconnecting accessories from the device, touch the
Equipotential stud located on the back of the device for 2 seconds or more to
remove static electricity from your body.
21