Schwinn IC2 Service Manual page 65

11. Loosen the Hex Head Bolt (C) that attaches each Flywheel
Retainer Clip (A) to the Frame. Remove the Hex Head Bolts,
Flywheel Retainer Clips and Nuts (F) from the Frame. Keep the
hardware safely aside for reassembly.
12. Carefully move the Flywheel (G) to the opening in the flywheel
brackets (B). Carefully lift the Drive Chain (I) off the Flywheel
sprockets (J) to the outside.
NOTICE: This step may require two people. It may be helpful to
remove the Brake Assembly (H) and Brake Cover (L).
13. Lift the Drive Chain (I) off the Sprocket Drive (K) to the outside.
Be sure to keep fingers clear of all pinch hazards as
you turn the Sprocket Drive and Flywheel.
X2
L
H
J
K
65
B
E
F
A
C
I
G
B
E