Schwinn IC2 Service Manual page 38

Disconnect the data cable from the console before you service this machine.
Note: Your machine may not match the image. For reference only.
1. Loosen and remove the Pedals. Set them
safely aside for reassembly.
Note: The Left Pedal is reverse-threaded.
Orientation is based from a seated position
on the bike. The Left Pedal has an "L",
the Right Pedal an "R".
2. Carefully remove the Chain Guard Door (1).
Discard the old Chain Guard Door.
3. Carefully remove the Chain Guard Center from the Chain Guard
Cover. Discard the old Chain Guard Center.
1
L
38
R