Schwinn IC2 Service Manual page 13

5. Saturate the Brake Pad felt (D) with silicone lubricant. Wipe off
the excess lubricant to prevent drips and stains.
6. Reinstall the Brake Pad (B).
NOTICE: Do not crimp the cable.
7. Reinstall the Brake Cover.
NOTICE: Do not crimp the cable.
8. Adjust the Resistance Knob (A) as necessary.
9. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
D
B
13