Front Panel - Arris Touchstone TG1682G User Manual

Front Panel

The front of the Telephony Gateway has the following indicators.
1. WPS Button/LED: begins associating the Telephony Gateway with a wireless device. LED
indicates Wireless Protected Setup (WPS) is active.
2. DECT Button/LED: pages all of the registered handsets. Press again to cancel paging. Press
and hold the button for 15 seconds to place the unit in registration mode for handset
registration.
Note: The DECT button only works with CAT-iq 2.0 cordless handsets.
3. Power: indicates whether AC power is available to the unit.
4. US/DS: indicates upstream/downstream connectivity.
5. Online: indicates internet data transmission status.
6. 2.4 GHz: indicates the status of the 2.4 GHz wireless LAN.
7. 5 GHz: indicates the status of the 5 GHz wireless LAN.
8. Tel 1: indicates the status of telephone line 1.
9. Tel 2: indicates the status of telephone line 2.
10. Battery: indicates the battery status.
Release 24 STANDARD 1.2 August 2016
© 2014-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 5: Installing and Connecting your Telephony Gateway
Touchstone TG1682G Telephony Gateway User Guide
23