System Requirements; Recommended Hardware; Windows; Mac Os - Arris Touchstone TG1682G User Manual

System Requirements

The Touchstone Telephony Gateway operates with most computers. The following describes
requirements for each operating system; see the documentation for your system for details
on enabling and configuring networking.
To use the Telephony Gateway, you need DOCSIS high-speed Internet service from your
service provider. Telephone service requires that the service provider has PacketCable
support.

Recommended Hardware

The following hardware configuration is recommended. Computers not meeting this
configuration can still work with the TG1682G, but may not be able to make maximum use of
TG1682G throughput.
CPU: P4, 3GHz or faster

RAM: 1GB or greater

Hard drive: 7200 RPM or faster

Ethernet: Gig-E (1000BaseT)


Windows

Windows Vista, Windows 7, Windows 8, or Windows 10. A supported Ethernet or wireless
LAN connection must be available.

Mac OS

System 7.5 to Mac OS 9.2 (Open Transport recommended) or Mac OS X. A supported Ethernet
or wireless LAN connection must be available.

Linux/Unix

Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported Ethernet or
wireless LAN connection must be available.
Release 24 STANDARD 1.2 August 2016
© 2014-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 3: Getting Started
Touchstone TG1682G Telephony Gateway User Guide
13