Programming - Siemens SITRANS LR250 Operating Instructions Manual
Radar transmitters
Hide thumbs
Also See for SITRANS LR250:
- Operating instructions manual (306 pages) ,
- Quick start manual (272 pages) ,
- Instruction manual (175 pages)
Table of Contents
Advertisement
Commissioning
6.2 Operating via the handheld programmer
6.2.3
Programming
Note
• While the device is in PROGRAM mode the output remains active and continues to
respond to changes in the device.
• The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu level).
Change parameter settings and set operating conditions to suit your specific application. For
remote operation see Operating via AMS Device Manager (Page 79).
Parameter menus
Note
For the complete list of parameters with instructions, see Parameter reference (Page 143).
Parameters are identified by name and organized into function groups. See LCD menu structure
(Page 296).
60
1. QUICK START
2. SETUP
2.1. IDENTIFICATION
2.2. DEVICE
............
2.4. LINEARIZATION
2.4.1. VOLUME
2.4.1.1. VESSEL SHAPE
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC
Advertisement
Table of Contents
