7.1.12.3
Operation (RESOURCE)
Navigate to Configure/Setup > RESOURCE > Operation.
Click on Block Modes to open the dialog window for access to:
Block Modes:
● Actual Mode
● Target Mode
● Permitted Mode
● Normal Mode
Note
• For descriptions of Block Modes see Operations (LTB) (Page 93).
• If the RESOURCE block is set to Out of Service, the LTB, and AIFB blocks are forced to
Out of Service also, but the LCD and DIAG blocks remain in Automatic mode
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC
Remote operation
7.1 Operating via AMS Device Manager
113