Non-Port-Side Led Patterns For Vdx 6940-36Q - Brocade Communications Systems VDX 6940 Hardware Installation Manual

Non-port-side LED patterns for VDX 6940-36Q

TABLE 9
LED name
For Brocade VDX
6940-36Q, each of four
LEDs above or below the
40 GbE ports indicate
status of the individual 10
GbE lanes when in port is
in 4x10 GbE breakout
mode.
Fixed 10 GbE ports
(Brocade VDX 6940-144S)
Non-port-side LED patterns for VDX 6940-36Q
The general operation of non-port-side LEDs during normal operation (no faults) is as follows:
• The power supply status LED displays steady green when the power supply is receiving power.
• The fan status LED displays amber when the device is first powered on until POST completes.
The following table describes detailed non-port-side LED behavior and recommended user actions.
TABLE 10
LED name
Power supply status. One
green LED per power
supply.
78
Port-side LED patterns during operation (Continued)
LED color
Flickering green
Off (no light)
Steady green
Flashing green
Flickering green
Off (no light)
Steady green
Blinking green
Flashing amber
Non-port-side LED patterns during operation
LED color
Off (no light)
Status of hardware Recommended action
Activity on 40 GbE port. No action required.
10 GbE lane is offline - Enable the port.
either disabled, faulted, or
Check messages for faults
enabled but no link.
and take necessary action.
Establish link connection.
10 GbE lane is online. Link No action required.
is present, but no activity.
Beaconing is enabled. No action required.
Activity on 10 GbE port. No action required.
No module or cable. Port is Install module or connect
offline - either disabled, cable.
faulted, or enabled but no
Enable the port.
link.
Check messages for faults
and take necessary action.
Establish link connection.
Port is online. Link is No action required.
present, but no activity.
Activity on port No action required.
Port has faulted. Check messages for faults
and take necessary action.
Status of hardware Recommended action
Power supply is not Verify the assembly is on
receiving power or is off. and seated and the power
cord is connected to a
functioning power source.
Brocade VDX 6940 Hardware Installation Guide
53-1003495-02