Port Numbering; Non-Port Side Of The Brocade 5100; Field Replaceable Units (Frus) - Brocade Communications Systems 5100 Hardware Reference Manual

Port Numbering

The Fibre Channel ports on the Brocade 5100 are numbered from left to right, in eight-port groups from
0 to 39 as illustrated in the following figure.
FIGURE 2 Port Numbering on the Brocade 5100
ATTENTION
Brocade ISL Trunking is licensed software that allows you to create trunking groups of ISLs between
adjacent switches. Trunking is supported by combining maximum of eight ports per group to form 64-
Gbps ISL trunk. The trunking port groups are 0-7, 8-15, 18-23, 24-31, and 32-39. For more information
about Brocade ISL Trunking, refer to the Brocade Fabric OS Administrator's Guide.

Non-port side of the Brocade 5100

The non-port side of the Brocade 5100 includes the two redundant power supply-fan assemblies and
the corresponding status LEDs.
FIGURE 3 Non-port side view of the Brocade 5100
1. Fan (for power supply/fan FRU2)
2. Power supply/Fan status LED (for power supply/fan FRU 2)
3. Power supply connector (for power supply/fan FRU2)
4. Fan (for power supply/fan FRU2)
5. Fan (for power supply/fan FRU1)
6. Power supply/Fan status LED (for Power Supply/fan FRU 1)
7. Power supply connector (for power supply/fan FRU 1)
8. Fan (for power supply/fan FRU1)

Field replaceable units (FRUs)

The Brocade 5100 has two integrated power supply and fan unit field replaceable units (FRUs). These
power supply/fan assembly units are hot-swappable and redundant, and are capable of functioning
universally without voltage jumpers or switches. The FRU units are identical and interchangeable.
Brocade 5100 Hardware Reference Manual
53-1000854-06
Port Numbering
11