Table of Contents
Advertisement
Connect the Handheld to the Cable
1.4
Assembly
The cable connectors are keyed for positive mating and to prevent connector damage
its IP-67 waterproof rating when the cable is disconnected. However, the connectors are not wet-mateable and should
be clean and dry before connecting.
Align the keys on the cable connector with the slots on the handheld connector. Push together firmly, then twist the
outer ring clockwise until it locks into place.
1 Handheld female connector
2 Slotted area of connector
6
Figure 3 Keyed connectors
3 Keyed area of connector
4 Cable male connector
(Figure
3). The handheld retains
1
2
3
4
Introduction
Advertisement
Table of Contents
