Table of Contents
Advertisement
2.2
Startup
Push the On/Off (
) key to turn on the handheld. If the handheld does not turn on, make sure that the battery is
charged. Push and hold the
2.3
Navigation
The handheld contains menus to change user-defined options, functions, and parameters. Use the arrow keys
(
and
) to highlight different options within menus and sub-menus, then push the Enter (
option. Push the left arrow (
Push the Exit/Escape (
ENTER
push the
key. Enabled functions appear as a circle with a dot (
functions appear as a circle only (
Alpha/Numeric Entry
When required, an alpha/numeric entry screen will be shown. Use the arrow keys to highlight a specific character and
ENTER
key to select it for entry. When finished entering information, highlight ENTER, then push the
push the
to save the entry
(Figure
NOTE: When in an alpha/numeric screen, the
cancel and return to the previous menu.
1
2
4
Figure 8 Alpha/numeric and numeric entry screens
Operation
key for 1.5 seconds to turn the handheld off.
) key to return to the previous menu.
) key to return to the Run screen. To enable or disable an option, highlight the option, then
Esc
) or an empty box (
8).
3
5
) or a box with a check mark (
).
key is for alpha/numeric navigation only. Push the
1
2
3
4
ENTER
) key to select the
). Disabled
Esc
1 User entry field
2 Delete entire entry
3 Backspace
4 Enter (highlighted selection)
5 Upper/lowercase
ENTER
key
key to
11
Advertisement
Table of Contents
