Table of Contents
Advertisement
2.7
Calibration Menu
Cal
Push the Calibrate (
key to view sub-menu options. Pre-defined or user-selected parameters are noted within brackets ( [ ] ). Refer to the
Calibration section for sensor specific calibration procedures.
NOTE: User ID, Probe ID, and User Field #1 and #2 can be enabled in the Calibration Settings under the
System menu.
1 Sensors connected
2 Optional Depth sensor calibration
3 Barometer calibration
4 Restore Default Calibration - restores
specified sensor to factory default
Operation
) key to access the Calibration menu
1
2
3
4
5
6
7
Figure 36 Calibration menu
(Figure
36). Highlight a sub-menu then push the
5 User ID
6 Probe ID
7 User Field #1
ENTER
25
Advertisement
Table of Contents
