2.5
System Menu
Push the System (
) key to view and adjust instrument settings. Highlight a sub-menu then push the
the sub-menu options
(Figure
Pre-defined or user-selected options are noted within brackets ( [ ] ).
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 10 System menu
Figure 11 Date/Time
Operation
10).
Date/Time
→
Date/Time
For accurate logging and calibration data, correctly set the date and time
options
Time.
Date/Time options:
• Set YY/MM/DD, MM/DD/YY, DD/MM/YY or YY/DD/MM date format
• Set the correct date
• Select 12 or 24 hour time format
• Set the correct time
1 Set the Date and Time
2 Change the user-defined Calibration Options
3 Change the instrument Language settings
4 Change the Radix Point
5 Change the Logging options
6 Change the Sampling options
7 Set the handheld Auto-Shutoff time
8 Set the Backlight mode
9 View the Software Version
10 View the handheld Serial Number
11 View and adjust the Unit ID
12 View the Sensor specific information
13 Adjust the display Brightness
(Figure
11). Select any of the following options to set the Date/
ENTER
key to view
13