Operation; Keypad And Navigation - YSI ProDIGITAL User Manual

2. Operation

2.1

Keypad and Navigation

1 System: Opens the system menu. Use to adjust
system settings.
2 Probe: Opens the sensor menu. Use to setup sensors,
change the units shown, select the sensor averaging
mode, and turn on/off Auto Stable and GPS.
3 Calibrate: Opens the calibration menu. Use to
calibrate sensors or restore default calibration.
4 File: Opens the file menu. Use to view logged data
and calibration files, backup data to a USB stick, and
delete data.
5 Exit/Escape key: Exits to the Run screen. When in an
alpha/numeric entry screen, returns to previous menu.
6 Backlight: Turns the keypad backlight on or off for use
in low light conditions.
10
1 2
5
7
9
11 12
Figure 7 Keypad description
7
8
9
10 ON/OFF: Turn on or turn off the instrument.
11 Up/Down arrow keys: Scroll through menus or enter
12 Enter key: Push to confirm selections. On the Run
3 4
6
8
10
Left arrow key: Navigate left in an alpha/numeric
entry screen. Push to return to previous menu in all
screens except alpha/numeric entry. On the Run
screen, push to show graphical representations of the
displayed measurements.
Right arrow key: Navigate right in an alpha/
numeric entry screen. On the Run screen, push to
show graphical representations of the displayed
measurements. In the View Data screen, push to view
additional parameters in the data set.
Help: Shows context sensitive help.
numbers and letters.
screen, push to log a single data point or start
continuous data logging.
Operation