Table of Contents
Advertisement
3.1 REGULAR MAINTENANCE
Please remove the accumulated dust and dirt from the external surfaces of the device, wipe it with a dry or a damp cloth
or a napkin. Please remove the accumulated dust, dirt and foreign matter from the sockets and clean them with a soft brush.
In case of pollution of ceramic covers or transducers the ultrasonic contact with the tested object is possible. Please
regularly check the parts of the device and clean the ceramic covers with a cloth moistened with spirit.
3.2 REESTABLISHING THE FUNCTIONALITY OF THE DEVICE
3.2.1 Reestablishing the functions
In case the device does not operate correctly, their es not image or signals, error messages on the screen or after a long
downtime and other events it is necessary to switch off and then switch on the device. If it does not help, please contact the
service center of the manufacturer by e-mail: info@acs-international.com or phone: +49 681-9659-2270.
3.2.2 Possible malfunctions
In the table 17 the malfunctions are shown that can be solved by the operator.
If the measures did not lead to normal operation, please contact the manufacturer by
e-mail: info@acs-international.com or phone: +49 681-9659-2270.
Table 17
Signs
The device does not switch on
А1040 MIRA Low-Frequency Ultrasonic Tomograph
Possible reasons
Troubleshooting
Switch on the device as follows:
Error in memory of the device
1. press the key
2. press the key
for several seconds
43
ACOUSTIC
CONTROL
SYSTEMS
3
TECHNICAL
MAINTENANCE
Operation Manual
Advertisement
Table of Contents
