Table of Contents
Advertisement
ACOUSTIC
CONTROL
SYSTEMS
1
Figure 13
Operation Manual
А1040 MIRA Low-Frequency Ultrasonic Tomograph
MAP MODE
This mode is used for the generation of the data arrays in form of B-Scans (perpendicular to the surface) when scanning
with the antenna array along the marked lines with a constant step. Any B-Scan from the collected three-dimensional data set
can be shown on the screen.
The inspection is performed using step-by-step scanning of the inspected object with data accumulation and volume
reconstruction of all scanned aread of the inspected object on the external computer. (Figure 13).
Figure 14
20
Advertisement
Table of Contents
