Table of Contents
Advertisement
ACOUSTIC
CONTROL
SYSTEMS
1
Scanning step
Cursor position
Name of the map
Scale of cursor's
positions in X-direction
Map
Horizontal scale
Saved map in
the view mode
Scale of cursor's
positions in Y-direction
Vertical cursor
Operation Manual
А1040 MIRA Low-Frequency Ultrasonic Tomograph
1.4.3 MAP mode
The mode is used to collect automatically save the data on the tested object, together with current settings of the system.
The indication of B-Scans images generated with the received data is also possible.
Make sure that the B-Scans collected in the REVIEW mode are correct, after that you may use the MAP mode.
On the screen only the images of B-Scans received in current position of the device are shown. In the memory of the device
the received signals and system options are registered automatically.
For switching between the modes, press
.
36
Current position data
Current time and date
Battery level indicator
Horizontal scale Х
B-Scan output field
Stripe of icons
Vertical scale Z
Figure 30
Advertisement
Table of Contents
