Systems And Condition Indication; Operation Modes - ACS A1040 MIRA Operation Manual

Ultrasonic low-frequency tomograph

Hide thumbs Also See for A1040 MIRA:

Table of Contents

1.3.5 Systems and condition indication

For your convenience the trigger button is located on the handle. By pressing this button, the signal transmission and

reception starts.

By pressing the trigger button, the field for data collection appears.

NOTE: TO OBTAIN CORRECT RESULTS OF INSPECTION DO NOT MOVE THE DEVICE AND WEAKEN THE CLAMPING DURING

THE DATA COLLECTION PROCESS!

After the completion of data collection, the indicating field changes its color

from red to green – the calculation of data is going.

The tomograph has two main operation modes, as well as an adjustment

function of the inspection parameters for each testing object suitable for further

on-line selection. The device allows to select different types of data represen-

tation on the screen during operation depending on the used operation mode.

REVIEW MODE

This mode is used for quick viewing of the internal structure of the testing

object in random places. The B-Scan is displayed on the screen to a depth up to

2.5 meters. (Figure 12).

Additionally the following procedures are performed in this mode:

- automatic determination of the propagation velocity of ultrasonic waves

- measurement of the coordinates and image levels in the tomogram

- thickness measurement of the testing object

- save and view В-Scans

-view A-Scans.

А1040 MIRA Low-Frequency Ultrasonic Tomograph

ACOUSTIC

CONTROL

SYSTEMS

Figure 12

Operation Manual

Table of Contents