The Description Of Operating Modes; Setting Mode - ACS A1040 MIRA Operation Manual

1.4 THE DESCRIPTION OF OPERATING MODES

1.4.1 Setting Mode

The mode SETTING is used to set and install the device parameters.When starting to work on a new testing object it is always
necessary to begin in this mode. To enter / exit the SETTING mode is necessary to press the key
The main screen in the SETTING mode is shown on the Figure 16. In the left column the list is of parameters is given, and in
the right column their values are given.
Functions of the icons in the SETTING mode during the parameter editing are given
in the Table 4.
Table 4
Key Icon
А1040 MIRA Low-Frequency Ultrasonic Tomograph
Description
Adjustment of parameters
Select gain and check the working
capacity of the antenna array
System options of the device
Absence of the B Scans saved / Review
of B-Scans parameters saved in
memory of the device
View the existing and create new MAPS
23
ACOUSTIC
CONTROL
SYSTEMS
.
Operation Manual
1
Figure 16