Table of Contents
Advertisement
ACOUSTIC
CONTROL
SYSTEMS
1
Operation Manual
А1040 MIRA Low-Frequency Ultrasonic Tomograph
Axis Y is located along the surface of the testing object, all along the tomograph. The correct direction is from left to right.
The zero is in the middle of the antenna array.
Axis Z is located in the depth of the testing object, it is perpendicular its surface. The correct direction is into the depth of
the testing object (where the transducers look). The zero is on a surface of the testing object.
B-Scan any section of testing object, perpendicular to axis X.
C Scan any section of testing object, perpendicular to axis Z.
D Scan any section of testing object, perpendicular to axis Y.
NOTE: THE SPECIFIC SOFTWARE IS NOT INCLUDED IN THE DELIVERY KIT OF THE DEVICE
The external software for A1040 MIRA with the possibility of forming 3D models of the object can be ordered directly
in ACS-Solutions GmbH, Germany.
The contact information:
Science Park 2, 66123 Saarbrucken, Germany,
Phone.: +49 681 9659-2272, Fax: +49 681 9659-2280
info@i-deal-technologies.com
22
Figure 15
Advertisement
Table of Contents
