Memory Transmission (Broadcasting) - Samsung MSYS 5200 User Manual

2.14
Sending a Fax

Memory Transmission (Broadcasting)

With Memory Transmission, documents are automatically stored in
memory and sent to a remote station. Use this feature to send your
documents to multiple locations. After sending, the documents are
automatically erased from memory.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 2.8.
2. Press Menu, then press Memory TX on the one-touch keypad.
3. Enter the number of the remote machine, then press Enter.
To enter the number, you can also press a one-touch button including
group dial button. Otherwise, press Speed/Status, enter a 2-digit
speed dial number, then press Enter. The stored number (and name)
appears in the display. Press Enter to confirm the number.
4. The display asks you to enter another fax number to send the
document to another location.
Note: The machine displays the ÔANOTHER FAX NUMBER?Õ message
repeatedly, each time you enter a fax number using manual dialing,
One-Touch, 2-digit Speed Dialing, or Group Dialing. If you already
used a group number at step 3, you cannot use another group number
any more. You can use only one group number at this transmission job.
If you have used this multi-address transmission feature in other
operation(s) currently registered in memory, the machine does not
display ÔANOTHER FAX NUMBER?Õ.
5. If you want to send to more than one location, press Enter and
enter another fax number using the number keypad, one-touch
dial, or 2-digit speed dial number. Note that you cannot use Group
dial number for another fax number.
The number appears in the display. Press Enter to confirm the
number.
Or
To send to one location or when you complete the last fax number
setting, press Stop.
6. The document will be scanned into memory before transmission. The
display shows the memory capacity and the number of pages, then
the machine begins sending the document.
ANOTHER
FAX NUMBER ?