Receiving Manually In Tel Mode; Receiving Automatically In Ans/Fax Mode - Samsung MSYS 5200 User Manual

Receiving Manually in TEL Mode

1. Press Rcv.Mode until the display shows ÔTEL.Õ
2. When the telephone rings, pick up the handset and answer it.
3. If you hear a fax tone, or if the person on the other end asks you to
receive a document, press Start on the machine.
Or, press the buttons Ô
telephone.
Ô 9 Ô is the remote receive start code preset at the factory. The
first and the last asterisks are fixed, but you can change the middle
character to whatever you choose. For more information, see page
2.37.
4. Replace the handset. The machine begins receiving and returns to
Standby mode when reception is complete.
Note: If your machine is not equipped with handset, youÕll pick up the
handset of the extension phone connected to EXT.LINE jack.

Receiving Automatically in ANS/FAX Mode

To use this mode, you must attach an answering machine to the
EXT.LINE jack on the back of your machine (see page 1.8).
1. Press Rcv.Mode until the display shows ÔANS/FAX.Õ
2. When you get a call, the answering machine answers it. If the caller
leaves a message, the answering machine stores the message normally.
If your machine hears a fax tone on the line, the fax receive mode is
activated.
Notes:
¥If you have set your machine to ANS/FAX mode and your answering machine
is switched off, or no answering machine is connected to the machine, the
machine will automatically go into fax receive mode after several rings.
¥If your answering machine has a Ôuser-selectable ring counterÕ, set the
machine to answer incoming calls within 4 ring.
¥If you are in TEL mode (manual reception) when the answering machine is
connected to your machine, you must switch off the answering machine, or
the outgoing message from the answering machine will interrupt your phone
conversation.
9 Õ (star-nine-star) on the extension
Receiving a Fax
2.19