Receiving A Fax - Samsung MSYS 5200 User Manual

Receiving a Fax

Receiving a Fax
Your multi-function machine has four reception modes:
¥ In FAX mode, the machine answers an incoming call and immediately
goes into receive mode, waiting for a fax to be sent.
¥ In TEL/FAX mode, the machine answers an incoming call expecting
to receive a fax. If the machine does not sense a fax signal, it will
continue to sound the ringing tone to tell you it is a phone call. If you
do not lift the handset during the ringing, the machine will switch to
automatic fax reception mode.
¥ In ANS/FAX mode, the answering machine answers an incoming call,
and the caller can leave a message on the answering machine. If the
fax machine senses a fax tone on the line, the call automatically
switches over to the fax machine. To use the ANS/FAX mode, you
have to attach an answering machine to the EXT socket on your fax
machine (see page 1.8).
¥ In TEL mode, automatic fax reception is turned off. You can receive a
fax only by manually picking up the handset and pressing Start.
The current reception mode is displayed in the bottom line of the
display window when the machine is in Standby mode.
JUL-18-1998 100%
10:30
If you seldom use the fax line for voice conversations, set the fax
machine to receive a fax automatically by selecting either FAX mode or
TEL/FAX mode.
Note: While you print a PC file with this machine, an incoming fax will be
received and stored in memory. If you have a lot of pages to print, we
recommend stopping PC printing to prevent memory from becoming full.
FAX
Receiving mode
Receiving a Fax
2.17