Memory Transmission - Samsung SF5500 Installation And Operation Manual

APR-15 15:30
DOCUMENT READY
TEL)_
TEL) 0 5 5 1 1 2 3 4 5 6 7
ANOTHER FAX
NUMBER ?
TO MEMORY P. 01
MEMORY USED= 16%
SAMSUNG ELECTRONICS CO., LTD

MEMORY TRANSMISSION

A document can first be scanned into memory, then transmitted to
a remote station without operator assistance. After the
transmission is completed, the document is automatically erased
from memory.
1
Load a document face down into the feeder.
FRI
2
Press M E M O RY TX (MEMORY TX/DUAL in SF5500M/SF5600).
3
Enter the fax number of the remote machine, using the dial
keypad, One-touch key, or 2-digit Speed Dial number or Group
number.
When the number appears correctly in the display, press YES.
For more information on Group numbers, see page 4-22.
4
Press NO if you do not want to send the document to multiple
locations. Go to Step 5.
Y/N
P ress Y E S if you want to send the documents to multiple
locations. The machine prompts you to enter another fax
number of remote party to which you want to send the same
document. Enter the next number, then press YES.
Repeat as necessary. When you have entered all the numbers,
press NO.
N o t e : A single broadcasting is available for your machine. If any
multi- address transmission is currently set up in your machine, the
ANOTHER FAX NUMBER ? prompt does not appear until the
currently set broadcasting is completed.
5
The machine automatically scans the document into memory
prior to transmission, then dials the number, confirms the
connection, and sends the document. The messages in the
display tell you what step is being performed.
3 - 1 1