Lcd Error Messages - Samsung MSYS 5200 User Manual

Display
RETRY REDIAL?
COMM. ERROR
INCOMPATIBLE
DOCUMENT JAM
DOOR OPEN OR
NO TONER
GROUP NOT
AVAILABLE
LINE ERROR
LOAD DOCUMENT
MEMORY FULL
NO ANSWER
3.6
Troubleshooting

LCD Error Messages

Meaning
The machine is waiting for the
programmed interval to
automatically redial a previously
busy station.
A problem with facsimile
communications has occurred.
Remote party did not have the
requested feature, such as polling.
This also occurs if the remote machine
has insufficient memory to complete
the operation you are attempting.
The loaded document has jammed
in the feeder.
The cover is not securely latched, or
the image cartridge is not installed.
You have tried to select a group
location where only a single
location number can be used.
Your unit cannot connect with the
remote machine, or has lost contact
because of a problem on the phone line.
You have attempted to set up a
sending operation with no document
loaded.
The memory has become full.
The remote machine has not answered
after all the redial attempts.
Solution
You can press Start to
immediately redial, or Stop to
cancel the redial operation.
Try again.
Reconfirm your remote partyÕs
feature.
Clear the document jam.
Press down on the cover until it
clicks in place, or install the
cartridge.
Try again. If failure persists, wait
an hour or so for the line to clear,
then try again.
Or, turn the ECM mode on. See
ÔUser Options.Õ
Load a document and try again.
Either delete unnecessary
documents, or retransmit after
more memory becomes available,
or split the transmission into
more than one operation.
Try again.
Make sure the remote machine is
operational.