Top Trim & Hinge Pocket Covers Installation - Fisher & Paykel RS6121S Installation Manual

installing the top trim (for all models)
top trim
installing the hinge pocket covers (for all models)
Follow the steps below to install the covers for the top, bottom or middle hinge pockets.
1
2
3
50
TOP TRIM & HINGE POCKET COVERS INSTALLATION
Slide one end of the top trim into the hinge pocket
of the appliance.
Press the other end to engage the dual lock strips
on the non-hinge side of the appliance.
Place the hinge pocket cover to the hinge pocket,
matching the studs on the cover to the slots in the
hinge pocket.
Slide the cover inside the pocket.
Press the pocket cover to ensure the cover clips
into the pocket.
Your Integrated Installation is now complete!