The number after CMD must be the same as
the first number after OPEN.
When you press the RETURN key, READY
will print on the paper instead of the screen.
Now PRINT and LIST will send information
to the printer rather than displaying it on the
screen.
Now type:
L I S T
OKIMATE will print your program listing.
To close the channel and return to normal
operation, type these two lines:
P R I N T S
C L O S E
Don't forget to press the RETURN key after
each line.
3
When you CLOSE the channel, you'll see
READY on the screen again. If you have any
problem closing the channel, press the RUN/
STOP and RESTORE keys at the same time.
You can use CMD within a program—for ex
ample, to print a listing at the end of the pro
gram. lust remember to close the channel
with the two lines above.
Your Commodore Owner's Guide and Pro
grammer's Reference Guide will give you
more details on using the commands we've
explained here.
Special Effects
When you turn OKIMATE on it will print 10
characters per inch and 6 lines per inch. But
OKIMATE features a variety of printing styles
you can use to put extra flair into your docu
ments just by adding a few simple commands.