Advanced Formatting - Oki OKIMATE 10 Handbook

ID O P E N 3,4
ED P R I N T # 3 , C H R $ ( E 7 ) ; C H R $ ( 1 D ) ; C H R $ ( 7 E )

ADVANCED FORMATTING

C H R $ ( 2 7 ) ; C H R $ ( 1 D ) ; n
CHR$ ( 2 7 ) ; CHR$ ( Ifc ) ; n 1n s
CHR$ ( 2 ? ) ; " A "
C H R $ ( 2 7 ) ; " B " Skip over perforation (OFF)
Fine Line Spacing
A normal line space is 1/6" from the
bottom of one line to the top of the next.
This fine line spacing commands lets you
change the spacing in multiples of 1/144" up
to 256/144". You just add the command,
CROSSING A FIN E LIN E
Fine line spacing
Fine positioning
Skip over perforation (ON)
CHR$(27);CHR$(10);, followed by the m ulti­
ple you want within the CHR$ format. The
fine line spacing command works for one line
only—if you want to continue on several
lines, you must enter the command at the be­
ginning of each line.
The sample program above changes the line
spacing from 1/2", which is 72/144", to 1/8",
which is 18/144". By the way, for 256/144"
line spacing use 0 in your CHR$ command.
36