Oki OKIMATE 10 Handbook page 23

Inserting Computer Paper
1. Set a small stack of computer paper on
the table or place a carton of paper on
the floor behind the OKIMATE.
2. Open the paper window.
3. Open the paper release.
4. Align the edges of the first page with
the outer marks on the paper guides. If
necessary, you may adjust the width of
the guides— snap to open; snap to
close. Slide the left guide so that it sets
the position of the left margin and the
right guide so that it adjusts to the
width of the paper.
5. Insert the paper behind the paper
guides.
6. Advance the paper with the paper ad­
vance knob.
7. Close the paper release and the paper
window.
8. Make sure the paper is even. If not,
check to be sure the border holes are
lined up on each margin.
Inserting Single Sheets
1. Lift up the paper window.
2. With a sheet of standard paper (8 1/2"
x 11"), align the edges with the inner
marks on the paper guides— snap to
open; snap to close.
3. Advance the paper using the paper
advance knob.
4. Make sure the paper is even. If not,
open the paper release, adjust the pa­
per, then close the paper release.
5. Close the paper window.