Oki OKIMATE 10 Handbook page 55

. . . I forget to ta k e the co lor rib b o n ou t w hen
printing textI
Your document will be printed in a random
variety of colors. If you want to print text in
color, it can be done, but follow the directions
on page 41.
. . . I w ant to r em o v e th e con trol m o d u le from
th e p rin ter{
Turn both the OKIMATE and the COM MO­
DORE off. Disconnect the power cord and the
data cable. Remove the locking cover and in­
sert the tabs in the cover into the slots on the
module. Holding on to the cover, gently slide
the module out of the printer. Don't use the
ports to pull the module out, they may snap
off.
. . . I h a v e m o re than on e p rin ter{
You can make your OKIMATE device 5 by
changing jumper plug SP1 on your Plug 'N
Print control module. Here's how:
1. Turn off your OKIMATE and your
COMMODORE.
2. Disconnect the data cable.
3. Remove the module locking cover.
4. Insert the tabs in the locking cover
into the slots in the module and gently
slide the module out.
5. Unsnap the plastic cover on the con­
trol module and find the jumper plug
labeled SP1.