Oki OKIMATE 10 Handbook page 31

ID O P E N 3,4
ED P R I N T ^ 3 , C H R $ ( E CI) ; " F I N E P R I N T »
3D P R I N T # 3 , C H R $ ( 1 5 ) ;" N O R M A L P R I N T "
4 D C L O S E 3
Will give you this:
FINE PRINT
NORMAL PRI NT
Fine P rin t
This printing style measures 17.1 characters
per inch. You can fit up to 136 characters on
a line using fine print, as opposed to 80 char­
acters per line for normal print.
To print fine characters, add CHR$(29) to
your print statement. Use CHR$(15) to switch
back to normal size print.
READING T H E F IN E PR IN T
Bold P rin t
Bold printing measures 8.5 characters per
inch— double the width of fine print. To get
this printing style, just add the wide print
command, CHR$(14), after you've changed to
fine print using the CHR$(29) command.
To switch back to normal print, use the
CHR$(15) command. To return to fine print,
use CHR$(29).
27