Oki OKIMATE 10 Handbook page 15

Where to Begin Printing:
When you first turn OKIMATE on, the top
margin will be set at the line where the
printhead is located. Therefore, to set the
first printing line to 1/2 inch from the top
of the page, just turn off your OKIMATE,
align the paper with the front edge of the
paper window and then turn OKIMATE on.
The first line printed will be 1/2 inch from
the top of the page and each subsequent
page will begin 1/2 inch from the top of the
page until the OKIMATE is turned off.
When using standard 11" continuous forms,
OKIMATE will automatically skip to the
predetermined first printing line whenever
it is 1/2" from the bottom of the page. This
prevents OKIMATE from printing on the
perforation.
Turn on your OKIMATE.
The rea d y light sh o u ld c o m e on. If it blin ks,
refer to p ag e 9 to d eterm in e w h at w ent
wrong. Then press th e sele c t bu tton to try
again.
1