Table of Contents
Advertisement
MAINTENANCE INSTRUCTIONS (continued)
AUTION:
ot Surface
Exposed surfaces can be hot
to the touch and may cause
burns.
D. TEMPERATURE CALIBRATION
TOOLS:
Digital Pyrometer with Oven Probe, Protective Gloves
1. With the oven empty, clamp the thermocouple sensor in the center
a. Pass the thermocouple sensor wires through the corner of the
b. Plug the sensor into the Pyrometer.
2. Turn the OVEN POWER (V.01) switch to ON. Turn the FAN
switch (V.02) to HI.
the display read "60:00".
temperature display reads between 370º and 380º, the calibration
is satisfactory. Otherwise:
display read "00:00".
d. Turn either the TIME or TEMP control until the desired offset is
displayed.
complete.
24
Advertisement
Table of Contents
