Table of Contents
Advertisement
CLEANING INSTRUCTIONS (continued)
AUTION:
LECTRIC
HOCK HAZARD
Disconnect appliance
from electric power before
cleaning.
AUTION:
OT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
drawers or cabinet surfaces.
VENTILATOR SECTION CLEANING INSTRUCTIONS
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
Container for disposal of grease
CLEANING
1. Disconnect appliance from electric power
2. Allow to cool before cleaning
grease cup. Empty the grease trough and grease cup.
to air dry.
Procedure is complete
20
Advertisement
Table of Contents
