Table of Contents
Advertisement
INSTALLATION (continued)
DANGER
IRE
AZARD
THE FIRE SUPPRESSION
SYSTEM MUST BE
CHARGED AND CERTIFIED
BY AN AUTHORIZED
ANSUL® DISTRIBUTOR.
NEVER ATTEMPT TO
MODIFY OR BYPASS
THE FIRE SUPPRESSION
SYSTEM. AN
UNCONTROLLED FIRE CAN
CAUSE SERIOUS INJURY,
DEATH AND/OR PROPERTY
LOSS.
IMPORTANT:
The FIRE
SUPPRESSION SYSTEM
must be SET-UP and
CHARGED by an authorized
Ansul® distributor before the
ventilator blower will operate.
suppression system is
discharged, a buzzer will
sound continuously and
remain inoperable until the
is serviced. Recharging
and resetting must be
performed by an authorized
Ansul® distributor ONLY.
Charging of the Ansul
Fire Suppression system
must be in accordance
with Ansul® Design,
Installation, Recharge
and Maintenance Manual.
FIRE SUPPRESSION SYSTEM INSTALLATION
1. Any REMOTE MANUAL PULL STATION must be installed by an
authorized ANSUL® distributor in accordance with the
AUTHORITY HAVING JURISDICTION.
NOTE: If a REMOTE MANUAL PULL STATION is installed, moving
the unit for servicing will cause the Ansul® system to discharge.
(i.e. remove rear casters and replace with legs). Additional legs
may be ordered through an Authorized Wells Service Agency. See
2. The FIRE SUPPRESSION SYSTEM is comprised of a
pressurized cartridge
& container of liquid
associated plumbing and
controls. It utilizes factory
installed FUSIBLE LINKS
for automatic actuation,
and a factory installed
MANUAL PULL STATION
for manual actuation.
Two NOZZLES are used
suppression media.
system activates, the
is discharged, both the
the ventilator are de-
energized, and a buzzer
will sound continuously.
media will form an emulsion designed to both smother and cool the
Call your Authorized Ansul® Distributor immediately for service.
suppression agent.
4. The MANUAL PULL STATION and any similar REMOTE MANUAL
ring on the pull station is pulled horizontally.
10
FIRE SUPPRESSION
AGENT DISPENSING
NOZZLES (2 PLACES)
ALL MODELS SHIP
WITH 2 FACTORY-
INSTALLED
FUSIBLE LINKS
REMOVE REAR PANEL
FOR ACCESS TO FIRE
SUPPRESSION SYSTEM
CONTROLS
MANUAL PULL
STATION
LOCATION
REAR CASTERS
REPLACED WITH
LEGS WHEN A
REMOTE MANUAL
PULL STATION
IS INSTALLED
IL2146
Advertisement
Table of Contents
