Disassembly - Labom PASCAL CV4 Operating Instructions Manual

Pressure transmitter

Hide thumbs Also See for PASCAL CV4:

Table of Contents

Disassembly

When measuring hot media, make sure that the device has cooled down prior to any dis-

mounting or wear appropriate protective clothing to avoid burns.

Switch off the power supply to the device before disconnecting the electrical connections.

Once this is done, the device may be mechanically removed.

Warning

Opening pressurized lines might cause severe injuries.

Danger of severe injuries or damage

Relieve the process pressure before attempting to remove the device.

Shut off the pressure supply for all feed lines to the device and relieve the

pressure in them.

Warning

Hazardous deposits and residues might remain on opened process connec-

tions and removed devices.

Danger of injury

After the device has been removed, seal off the measuring point and

mark the open process connection accordingly. Consider a possible dan-

ger due to residues when handling the removed device.

BA_080 Rev 1J8 Pressure transmitter PASCAL CV4

Page 5/24

Table of Contents

Do you have a question about the PASCAL CV4 and is the answer not in the manual?