Table of Contents
Advertisement
8. If the computer is not connected to the Internet, click Offline activation to register the
software. This allows the user to obtain the activation code and enter it at another time.
9. Click Next to continue.
10. Click the link provided and complete the form to obtain registration instructions. Click Finish.
6.3
Installing Camera Drivers
1. The software must be installed for the camera drivers to be installed. Open the Vision-
Works software suite.
2. Plug the USB cable from the camera into the USB port. At this time, the lens control box
USB or lens controller USB should also be plugged into the computer.
3. The computer should display Found New Hardware. The drivers will automatically install.
Note:
The installation may cause a warning message stating that the drivers are "not verified by
Microsoft". Select Continue Anyway and the drivers will be installed correctly.
81-0220-01 Rev R
Software Installation
21
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GelDoc-It2 and is the answer not in the manual?