Quantum DXi4510 Installation And Configuration Manual page 8

DXi4500 Installation and Configuration Guide
Figure 5 Installing the Rack
Mounting Rails (Round Holes)
8
Rail teeth
Release
button
Rail pegs
Front of rack
2 Place the DXi4500 on a level surface and align the four keyhole slots on the chassis
rails with the corresponding pins on the system. Slide the chassis rails towards the
back of the system until each one locks into place (see
WARNING: The DXi4500 weighs 49.5 lbs (22.5 Kg). Two people are required to lift the
chassis.
Note: To disengage the chassis rails, pull the latch and push the rails toward the front
of the chassis.
Front side of rack rails
Second tooth
engaged
Figure
Installing the DXi4500 System
Back of rack
Release
button
6).