Quantum DXi4510 Installation And Configuration Manual page 17

Figure 16 Getting Started
Wizard: Date & Time
Initial Configuration
Caution: Make sure you enter the correct IP address information and that you
write this information down. If you enter the incorrect IP address
information and reboot, you will not be able to access the system.
a Enter the Hostname used to identify the DXi4500 system.
b Enter the IP Address, the Netmask, and the Default Gateway (optional) you
want to use to join the DXi4500 to your network.
c (Optional) In the Domain Suffix Search List box, enter the local domain to
search first when resolving domain names.
The domain suffix is a single domain name. The domain name may contain only
letters (A–Z), numbers (0–9), dots (.), and hyphens (-).
d (Optional) In the Primary, Secondary, and Tertiary DNS IP Address boxes, enter
the IP address of up to three DNS servers used to resolve domain names and
translate them into IP addresses.
Caution: You must specify a DNS IP address if you plan to use hostname
format when configuring an NTP time server, outgoing e-mail
server, replication sources and targets, and other information.
6 Under Network Interfaces, select BOND ALL (not segmented).
7 Under Bonding, select Round Robin (Mode 0).
Note: Refer to the Quantum DXi4500 User's Guide (6-67092) located on the
documentation CD for information about additional bonding options.
8 Click Next to continue.
The Date & Time page displays (see Figure 16).
DXi4500
17