Quantum DXi4510 Installation And Configuration Manual page 16

DXi4500 Installation and Configuration Guide
Figure 15 Getting Started
Wizard: Network
16
Caution: Configuring network segmentation requires advanced networking
knowledge. When selecting network segmentation options other than
the options recommended in the following procedures, contact your
network administrator for assistance.
If you choose to use network segmentation or CIFS, refer to the
DXi4500 User's Guide for details.
Caution: For effective bonded network use, a properly configured network
switch is required. (A network switch is not supplied with the
DXi4500.) The DXi4500 bonding settings must match the switch
settings. If the switch settings and the DXi4500 settings do not match,
your system may become inaccessible through the switch.
4 Under Configure Network Settings, select the Basic option.
Note: Refer to the Quantum DXi4500 User's Guide (6-67092) located on the
documentation CD for information about the Custom or Segmented
network options.
5 Under General, enter the following information:
Note: Your network administrator will provide you with the IP address
information.
Initial Configuration