Quantum DXi4510 Installation And Configuration Manual page 12

DXi4500 Installation and Configuration Guide
Figure 9 Power Buttons
The NMI button is recessed to prevent it
from being pressed accidently. Press only
when instructed by technical support
Power button
Front
Figure 10 Ethernet Ports
Back
Not used
12
Note: Wait 30 minutes for the system to boot before continuing with the
procedure.
2 Using an Ethernet cable, connect the Ethernet port on the computer to Ethernet
port 2 on the back of the DXi4500. Ethernet port 2 is in the far left-hand Ethernet
port in the middle PCI slot (slot 2) as you face the back of the system (see
Ethernet port 2
2
Gb 1
Gb 2
Service port (not
for customer use)
Not used
3 Configure the network settings on the computer:
Note: This procedure assumes you are running Windows XP on the computer. The
steps might be different if you are using another operating system.
1
3 4 5
2
3
Figure 10).
1
2
Initial Configuration