Programming Your Telephone; Initializing Your Voice Mailbox; Customizing Your Voice Greeting; Modifying Your Personal Code - Alcatel-Lucent 8088 Smart DeskPhone V2 User Manual

8088 Smart DeskPhone

Programming your telephone

6.1 Initializing your voice mailbox

•
Light flashes.
•
•
Enter your personal code then record your name according to voice guide instructions.
Your personal code is used to access your voice mailbox and to lock your telephone.
A weak personal code will be rejected by the system:
•
Identical 4 digits (0000, 1111,).
•
A simple sequence of 4 digits (0123, 1234,).
Make sure you choose a strong password with at least 4 digits. The list of weak passwords provided
does not contain all the possibilities.

6.2 Customizing your voice greeting

You can replace the greeting message by a personal message.
•
Reach the 'Menu' page.
•
Settings Mailbox
•
You can listen to the greeting, customize the greeting and set the default greeting
Recordname).
•
You can replace the greeting message by a personal message (Persmessage).
•
You can choose between two modes: the automated attendant or recorded greeting
Record mode/Single
•
You can pause, resume or stop the recording at any time.

6.3 Modifying your personal code

•
Reach the 'Menu' page.
•
Settings Options Password
•
Old code (6 digits).
•
New code (6 digits).
•
As long as your voice mailbox has not been initialized, personal code is 515151.
Your password has 6 digits. A weak personal code with 6 identical digits (000000, 111111, etc.) or a
simple sequence of 6 digits (012345, 123456, etc.) will be rejected by the system. After a system
upgrade, the password may still have only 4 digits. For security reasons, we recommend you use a
password with 6 digits. Contact your installer for more information. The list of weak passwords provided
does not contain all the possibilities.
8AL90343ENABed01
mode)
(Listen,
(Mode
50 /66