Auto-Tare Timer Starts With Flow Mode Setting; Auto-Tare Auto-Start Timer Mode Setting; Auto-Tare Mode Setting; Bluetooth Setup Setting - acaia Lunar Operation Manuals

Auto-Tare Timer Starts with Flow Mode
1. The default Auto-Tare Timer Starts with Flow Mode with Droplet and Square Setting is set to
ON, which means this mode is enabled.
2. ON: The Auto-Tare Timer Starts with Flow Mode with Droplet and Square is enabled.
3. OFF: The Auto-Tare Timer Starts with Flow Mode with Droplet and Square is disabled.
4. Press and hold tare button for 1 second until [ NodE_5 ] is shown on LED to confirm the
selected option.
Auto-Tare Auto-Start Timer Mode
1. The default Auto-Tare Auto-Start Timer Mode with Triangle and Square Setting is set to ON,
which means this mode is enabled.
2. ON: The Auto-Tare Auto-Start Timer Mode with Triangle and Square is enabled.
3. OFF: The Auto-Tare Auto-Start Timer Mode with Triangle and Square is disabled.
4. Press and hold tare button for 1 second until [ NodE_6 ] is shown on LED to confirm the
selected option.
Auto-Tare Mode
1. The default Auto-Tare Mode with Square is set to ON, which means this mode is enabled.
2. ON: The Auto-Tare Mode with Square is enabled.
3. OFF: The Auto-Tare Mode with Square is disabled.
4. Press and hold tare button for 1 second until [ bt_SEt ] is shown on LED to confirm the
selected option.
Bluetooth Setup Setting [ bt_SEt ]
1. OFF: The Bluetooth is disabled. The scale does not allow any Bluetooth connection.
2. ON: The Bluetooth is enabled. The scale allows Bluetooth connection. User may connect the
scale with Acaia Apps.
3. Press and hold tare button for 1 second until [ bAttSa v E ] is shown to confirm the modification.
Chapter 4: Configuration
Setting [ NodE_6 ]
Setting [ NodE_4 ]
Setting [ NodE_5 ]
26