Weighing Resolution Setting; Weighting Only Mode Setting; Dual Display Mode Setting; Timer Starts With Flow Mode Setting - acaia Lunar Operation Manuals

Weighing Resolution Setting [ rESoL ]
1. The default Weighing Resolution is set to [ dEFAUL ]: the division is 0.1 g /0.002 oz.
2. Tap tare button to switch the weighing resolution between [ dEFAUL ] and [ hiGh ].
3. When the Weighing Resolution is set to high, division will be 0.01 g/0.0005 oz. The default
display will show [ 0.00 ] when the scale is set to grams, and [ 0.0000 ] for ounces in Weighing
Mode.
4. Press and hold tare button for 1 second until [ NoDE_1 ] is shown on the LED to confirm the
selected option.
5. Note: After setting Weighing Resolution to high, the default display will show [ 0:00 0.00 ] with
timer in Dual Display Mode and Auto Start Modes.
Weighing Only Mode Setting [ NoDE_1 ]
1. The default Weighing Only Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Weighing Mode is enabled.
3. OFF: The Weighing Mode is disabled.
4. Press and hold tare button for 1 second until [ NoDE_2 ] is shown on LED to confirm the
selected option.
Dual Display Mode Setting [ NodE_2 ]
1. By default, the Dual Display Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Dual Display Mode is enabled.
3. OFF: The Dual Display Mode is disabled.
4. Press and hold tare button for 1 second until [ NoDE_3 ] is shown on LED to confirm the
selected option.
Timer Starts with Flow Mode
1. By default, the Timer Starts with Flow Mode with Droplet Setting is set to ON, which means this
mode is enabled.
2. ON: The Timer Starts with Flow Mode with Droplet is enabled.
3. OFF: The Timer Starts with Flow Mode with Droplet is disabled.
4. Press and hold tare button for 1 second until [ NoDE_4 ] is shown on LED to confirm the
selected option.
Chapter 4: Configuration
Setting [ NodE_3 ]
25